Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers
- Big brother to the #869 handlebars - These are veritable pillars of chrome - 1"(25.4mm) clamp, 13" rise, 24.5" wide - Handmade in Maysville, Kentucky
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
Thomson custom-drawn alloy drop bars are optimized with performance-based bends, paired with tough, durable features. The lineup includes 3 profiles with varying widths, shapes and flares to meet all disciplines of drop bar goodness. Made from 7000 series aluminum, and sharing the carbon drop bar shapes, the alloy drops feature 3 profiles a mid flat, a round profile, and the flared dirt drop. The mid-flat is minimal in design and big on comfort. The flat diameter stays small enough so to not restrict hand movements when riding on the tops. Concave shaping on the bottom side allows housing to be taped and out of the way. The round profile and flare dirt drop share similar top profiles with custom-drawn ergonomic bends.
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Lightweight aluminum construction with a versatile riser bar design.
Sturdy steel construction with a versatile riser bar style.
Chrome-plated steel North Road style touring handlebar.
Specialized's Expert Alloy Shallow Bend Handlebar offers the same ergonomic benefits as the S-Works version, delivering a strong and affordable bar with no compromise. - Premium butted aluminum, high-strength design - Ergonomic top perch alleviates pressure on hands; smooth transitions for fit & comfort - Shallow bend drop design: 123mm drop x 75mm reach - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls - Front of bar optimized for dual-cable routing
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. For added stability we've added 12 degrees of flare at the drop to give that wide stance. - Constructed from 6061 Butted Aluminum for a high-strength design. - 15mm rise provides a wider range of fit. - Shallow Bend Drop: 103mm drop x 70mm reach x 12d flare
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Expert Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. - 15mm rise for additional rider fit range. - Constructed from 2014 Premium Butted Aluminum for a high-strength design. - Shallow Bend Drop: 123mm drop x 75mm reach
- 6061-T12 aluminum with round, Compact bend and a shallow drop - easy to reach brake lever positioning - Drop: 130mm - Reach: 75mm
We at Albrecht’s love the thoughtful items brought into existence by SimWorks. SimWorks is a collaborative effort of Japanese designers and the finest Japanese manufacturing. With high quality workmanship as the focus, SimWorks makes a bold statement against the trend of mass production in making all of their products by hand. from SimWorks: When asked to find a word to best describe this bar we always say “superb”. We carefully follow trends and when developing the GETAROUND Bar we focused on width, bend and rise. This is a very smart design that can be used in any condition and any place you want to take it. Material: CrMo Steel Width: 700mm Rise: 10mm Sweep: 20deg. Center diam: 25.4mm Bar diam: 22.2mm Color: Silver (SOLD OUT) & Black Attention: Skid proof and clear coating are applied as a final treatment on this item and the actual size is wider than the diameter on the each size description. Please be aware of the installation of the stem, levers, and lock-type grips which have very severe inner diameter.
***for local purchase only for a limited run, Nitto is making the Mow mow bar available in thinly crafted CrMo Steel for ultra durability. Fancy fancy sticker pack included! __________________________ from SimWorks: We need to know what people simply want. .... We imagine the coolest riser bar ever as light and durable as we can produce. A bar that will never be bent and broken even though a giant stepped on it, and moreover we think that we should make the best out of its thinner look. We think that this bar will fit any kind of on-off bicycles. Mowmow bar was produced out of our pure thoughts. Of course made by NITTO. Bar center : 25.4mm / Rise : 38mm / Backsweep 9° / Whole length : 700mm. It is kind of short compared to recent bars, but it will fit absolutely almost all of our body types unless you were a giant. Its rigidity proves the best durability. Now, we would like to redefine the standard riser bar. [SPEC] Material: CRMO STEEL Width: 700mm Center diam.: 25.4mm Bar diam.: 22.2mm Rise: 38mm Sweep: 9°(Back) / 5°(Up) Color: Silver Dullbright -or- Chrome
We at Albrecht’s love the thoughtful items brought into existence by SimWorks. SimWorks is a collaborative effort of Japanese designers and the finest Japanese manufacturing. With high quality workmanship as the focus, SimWorks makes a bold statement against the trend of mass production in making all of their products by hand. from SimWorks: Farther away. Faces whose touring on a wasteland are severe, covered by dust deeply inside each their wrinkles. For whom? and for what purpose? Just in order to get an extra cold beer, they smile through the dust. This new drop bar called ‘To Smile Bar’ is made for beloved and crazy riders for sure. Produced by NITTO as you may already know. We adopt 26.0mm for a bar center and it creates better durability even with 560mm width as a normal size. Material: Heat Treated Aluminium Width: 520 & 560mm (center - center at ends) Center diam: 26.0mm Bar diam: 24mm Reach: 100mm Drop: 92mm Color: Silver & Black Attention: Skid proof and clear coating are applied as a final treatment on this item and the actual size is wider than the diameter on the each size description. Please be aware of the installation of the stem which has very severe inner diameter.
For those seeking a different take on a traditional mountain bike handlebar, the Salsa Bend Bar is available with either a 17 or 23-deg sweep, offering a more natural hand position without affecting reach or requiring the need to change your stem length. The Bend Bar swoops forward, then sweeps back to create an angled perch that’s easy to hang on to. They’re tough, strong, and durable, and great for long days bikepacking, touring, or shredding singletrack. - Constructed using double-butted, AL-7050-T76 aluminum - Bar sweeps forward, then back, to preserve stem length - 5-deg upsweep allows adjustment to suit personal preference - Bar can be flip-flopped to run up or down - Graduated ends for easy trimming - Bead-blast black finish
$80.00 - $84.00
The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 7050-T6 series aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 293g (44cm)
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 160mm width for use with Salsa Anything Cradle and aerobars - Weight: 221g - Note: Rustler bars are not compatible with bar ends
The Ritchey Comp VentureMax Road Handlebar is just as applicable on a cross country tour as on cross country singletrack. Intended to ride wider than typical drop bars, the VentureMax is measured at the initial bend rather than at the hood. While it boasts a number of attributes including multiple hand positions, it’s the return of the Bio-bend in the drop that adds to the signature look and feel of this bar. - Compatible with all hood types - Evo sweep of 6 degrees - Bar Clamp Diameter: 31.8mm - Bar Drop: 102mm - Bar Reach: 76mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Anatomic - Cable Routing: External - Material: Aluminum - Clip-on Compatible: Yes - Flare: 24
Just enough rise, and at the right width, Ritchey Trail Rizer is a heavy-duty performer at entry-level pricing. - Material: double-butted 6061 alloy - Width: 780mm - Rise: 20mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 385g
Ideal for dialing in fit on bikes with tall front ends, the 2x Flat bar can be mounted with positive or negative 5mm rise to achieve the ideal riding position. Constructed of HMF UD carbon, the 2x Flat bar is perfect for race-worthy weight savings on any XC rig. - Carbon monocoque construction - Rise: +/- 5mm - Width: 710mm - Not bar end compatible - Matte UD finish - 183g
Ritchey WCS VentureMax XL 52cm wide appeals to bikepackers with a 24-degree drop flare and comfortable reach/drop. - Broad 52cm width offers plenty of space for mounting accessories and bags - The flattened 38 x 22.5mm top section provides a comfortable area for resting hands - Width is measured at the initial bend rather than at the hood - Bar Clamp Diameter: 31.8mm - Bar Drop: 102mm - Bar Reach: 75mm - Bar Top Style: Flat - Accessory Mount Diameter: 31.8 - Drop Bend Style: Anatomic - Material: Aluminum - Clip-on Compatible: Yes - Flare: 24
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
Hit that "sweep spot", and meet the handlebar that's got your back. While it's no secret that wider bars are en vogue and bike frames are embracing longer reach, the stretched-out position this puts riders in is often an afterthought. So we made sure these 31.8mm handlebars play nicely with modern geos. With 10° back sweep and 5° upsweep, the Range: KW Edition helps put your shoulder blades in a more neutral position while reducing wrist fatigue and discomfort. Inspired by pro rider Kyle Warner's search for the best cockpit configuration, the Range now features 2014 Aluminum Alloy. 2014 is a trail-friendly material, resembling carbon's chatter-absorbing qualities in a more cost-conscious and durable package. It's lighter than the ubiquitous 6061 alloy, and it's more supple than 7075 Series. Last but not least, this handlebar isn't just here for your bike, it's also on a mission to give back to the cycling community. Unlike a traditional signature product (that often means a kickback for the pro rider behind it), for Kyle, it was really important that we did something special. So, we've pledged to give 5% of all sales to NICA, the National Interscholastic Cycling Association. "At the end of the day we are all big kids on bikes, and what better way to keep the sport growing than to give back to the younger generation and the people helping them fall in love with the sport." -Kyle Warner - Material: 2014-T73 heat treated alloy - Weight: 334g - Width: 780mm - Clamp Diameter: 31.8mm - Rise: 30mm - 5° upsweep, 10° backsweep
A few years back we started playing around with wider bars on our mountain bikes. Trendy? Yes. Beneficial? Absolutely. It wasn't simply the idea to go big, but a deeper look at the geometry of a mountain bike. Through this, we discovered that wider bars had a few killer benefits: more stability, further control, and extra comfort. As we began designing the Coast Drop Bar, these lessons of the wide MTB bar intrigued us. Does a wider drop bar provide extra stability and control? Why yes, yes it does. And let's chat comfort—the combination of a wider bar with a shorter stem and shallower drop provides ergonomic relief to the wrists and neck. These are bars that you can pump while sprinting, drop into while cruising, and handle the hoods with agility and ease. Now, shape and ergonomics aren't the only important things—material is key. We opted for a 6061 alloy to control vibrations while remaining light and nimble. Like a ski with a snappy core that pops and carves at the slightest intention, these bars use the unique dimensions and ideal material to give you playful freedom. Like any good burrito…width is important. - Dual-finish sandblast/polished black anodized - 65mm Reach - Works with shallow drop and exaggerated flare to make switching body position easy - 105mm Drop - Shallow Drop for when aero isn't everything and comfort is - 20° Flare - Combo of shallow drop and 20° flare provides more wrist comfort while moving back and forth between grips and hoods
ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer. The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We benchmarked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. SPECS - Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up - Weight: 20mm Rise (220g) 35mm Rise (225g) - Max Stem Clamp Width: 65mm - Max Control Torque: 5Nm - Minimum Trim width: 740mm - Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White COMPATIBILITY - Grips with only an outer clamp are not compatible with our bar.
The 10-4 Bar is the biggest bar Odyssey makes. It uses large radius bends, thicker walled, butted tubing, and a traditional 7/8-inch crossbar for superior strength and durability. These bars have a post-weld heat-treating which is guaranteed against manufacturer’s defects. Features: - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated Specs: - 10-inch rise - 30-inch width - 11-deg backsweep - 4-deg upsweep
Archer 2 handlebars were developed for use on Fairdale's Weekender Archer and Coaster/UK Coaster. You'll find these bars are both comfortable and stable for lots of different riding styles. Specs - Rise: 50mm - Width: 650mm - Backsweep: 45° - Clamp: 31.8mm
Page 1 of 2 Next page