- Big brother to the #869 handlebars - These are veritable pillars of chrome - 1"(25.4mm) clamp, 13" rise, 24.5" wide - Handmade in Maysville, Kentucky
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Lightweight aluminum construction with a versatile riser bar design.
Sturdy steel construction with a versatile riser bar style.
*Available locally only We at Albrecht’s love the thoughtful items brought into existence by SimWorks. SimWorks is a collaborative effort of Japanese designers and the finest Japanese manufacturing. With high quality workmanship as the focus, SimWorks makes a bold statement against the trend of mass production in making all of their products by hand. from SimWorks: It becomes a myth from a legend story. So many people asked us about it. "What is this bar?" "Do you still have any stocks? or do you plan to produce more?" "We really would like you to re-produce that bar again, please!". We really wanted to answer all these requests immediately and make their wish come true, but we needed to give up the re-production because of so many reasons and that weird bending process was hard to maintain... However, we still had passion and tenacity of purpose to do something about it, so now we finally five birth to this amazing FUN 3 Bar. We used to use aluminum to make this bar for a off-road bike and we were proud of making the strongest one. However, we ran out of aluminum tubings and didn't want to use something heavier than it used to be, so that we had to create something lighter by using chromoly. We did so many strength tests having spent 5 years, now we finally have this on the production. This new type FUN 3 BAR was created by NITTO's strong will saying that nothing can be bent. Moreover, this new type of ATB bar should be fitting any type of bicycle. Material: CrMo Steel Width: 680mm Center diam: 25.4mm Bar diam: 22.2mm Rise: 25mm Sweep: 35°(Back) 1.5°(Up) Color: Silver & Black Attention: Skid proof and clear coating are applied as a final treatment on this item and the actual size is wider than the diameter on the each size description. Please be aware of the installation of the stem, levers, and lock-type grips which have very severe inner diameter.
We at Albrecht’s love the thoughtful items brought into existence by SimWorks. SimWorks is a collaborative effort of Japanese designers and the finest Japanese manufacturing. With high quality workmanship as the focus, SimWorks makes a bold statement against the trend of mass production in making all of their products by hand. from SimWorks: When asked to find a word to best describe this bar we always say “superb”. We carefully follow trends and when developing the GETAROUND Bar we focused on width, bend and rise. This is a very smart design that can be used in any condition and any place you want to take it. Material: CrMo Steel Width: 700mm Rise: 10mm Sweep: 20deg. Center diam: 25.4mm Bar diam: 22.2mm Color: Silver (SOLD OUT) & Black Attention: Skid proof and clear coating are applied as a final treatment on this item and the actual size is wider than the diameter on the each size description. Please be aware of the installation of the stem, levers, and lock-type grips which have very severe inner diameter.
***for local purchase only for a limited run, Nitto is making the Mow mow bar available in thinly crafted CrMo Steel for ultra durability. Fancy fancy sticker pack included! __________________________ from SimWorks: We need to know what people simply want. .... We imagine the coolest riser bar ever as light and durable as we can produce. A bar that will never be bent and broken even though a giant stepped on it, and moreover we think that we should make the best out of its thinner look. We think that this bar will fit any kind of on-off bicycles. Mowmow bar was produced out of our pure thoughts. Of course made by NITTO. Bar center : 25.4mm / Rise : 38mm / Backsweep 9° / Whole length : 700mm. It is kind of short compared to recent bars, but it will fit absolutely almost all of our body types unless you were a giant. Its rigidity proves the best durability. Now, we would like to redefine the standard riser bar. [SPEC] Material: CRMO STEEL Width: 700mm Center diam.: 25.4mm Bar diam.: 22.2mm Rise: 38mm Sweep: 9°(Back) / 5°(Up) Color: Silver Dullbright -or- Chrome
*Available locally only We at Albrecht’s love the thoughtful items brought into existence by SimWorks. SimWorks is a collaborative effort of Japanese designers and the finest Japanese manufacturing. With high quality workmanship as the focus, SimWorks makes a bold statement against the trend of mass production in making all of their products by hand. The Mow Bar is the closest in spec to a "standard" mountain bike riser bar. Norm is not the norm from SimWorks and this has since evaporated from their site. Maybe it's back now? What time is it? Either way, the Stealth Grey is prime and made by Nitto. Quality implied (yet stated) Spec: Width: 750mm Rise: 38mm Backsweep: 9 degrees Material: Heat-treated Aluminum Color: Anodized Stealth Grey
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 160mm width for use with Salsa Anything Cradle and aerobars - Weight: 221g - Note: Rustler bars are not compatible with bar ends
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°
Hit that "sweep spot", and meet the handlebar that's got your back. While it's no secret that wider bars are en vogue and bike frames are embracing longer reach, the stretched-out position this puts riders in is often an afterthought. So we made sure these 31.8mm handlebars play nicely with modern geos. With 10° back sweep and 5° upsweep, the Range: KW Edition helps put your shoulder blades in a more neutral position while reducing wrist fatigue and discomfort. Inspired by pro rider Kyle Warner's search for the best cockpit configuration, the Range now features 2014 Aluminum Alloy. 2014 is a trail-friendly material, resembling carbon's chatter-absorbing qualities in a more cost-conscious and durable package. It's lighter than the ubiquitous 6061 alloy, and it's more supple than 7075 Series. Last but not least, this handlebar isn't just here for your bike, it's also on a mission to give back to the cycling community. Unlike a traditional signature product (that often means a kickback for the pro rider behind it), for Kyle, it was really important that we did something special. So, we've pledged to give 5% of all sales to NICA, the National Interscholastic Cycling Association. "At the end of the day we are all big kids on bikes, and what better way to keep the sport growing than to give back to the younger generation and the people helping them fall in love with the sport." -Kyle Warner - Material: 2014-T73 heat treated alloy - Weight: 334g - Width: 780mm - Clamp Diameter: 31.8mm - Rise: 30mm - 5° upsweep, 10° backsweep
Fairdale's Archer v2 handlebars were developed for use on the earlier Weekender Archer and Coaster/UK Coaster models. You'll find these bars are both comfortable and stable for lots of different riding styles. 50mm rise 45º back sweep 650mm wide 31.8mm clamp
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise
Answer's Alumilite handlebars provide ample width and rise to fit a 25.4mm stem clamp size. - Weight: 325g - Upsweep: 4° - Backsweep: 8°
Page 1 of 1