Headsets

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC44/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6|EC44/40 • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.0mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.0mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum

Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets

Chris King DropSet 3 Headset. - Crown Race: 30 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless - Bearing Type: Cartridge - S.H.I.S Lower: IS52 - S.H.I.S Upper: IS41

The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 5 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 49mm headtube.

The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 2 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 44/56mm headtube.

Why We Make This Headtube and fork steerer standards have proliferated in recent years, but for a long, long time these variables were more fixed, so we made thousands upon thousands of NoThreadsets™ to serve bikes with unthreaded fork steerers. We made them in a variety of diameters, and everyone was happy in the land. We still make it, because it's still a great headset for all those bikes that are still rolling through the world with a headset that will never die. Why You Want It For decades our NoThreadSet™ set the standard for quality headset function delivering precision performance to numerous world champions, grand tour winners, and aspiring riders around the world. Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) (1-1/8" only) - Available in 9 beautifully anodized colors in both bold and sotto voce marking options - Responsibly lightweight - Options to fit 1" and 1-1/8" straight steerer tubes - 1-1/8" available in Matte finish

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

FSA Standard Headset Bearings

- Weight: 160g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

- Bearing Type: Cartridge - Weight: 125g - Crown Race: 40 - S.H.I.S. Lower: ZS56 - S.H.I.S. Upper: ZS44 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

-Overdrive tapered road headset (2009-2016)

Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 10mm, 3mm and 2mm (15mm total) - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1-1/8 integrated headset. - 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).

New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 15mm dust cap. With 3mm, and 2mm spacers - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1 1/8-inch integrated headset. - 45º tapered bearings - 41.8mm outer diameter (fits 42mm BMX head tubes).

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features semi-cartridge high-quality bearings. - Material: Steel - Top Cover OD: 46mm - Bearings: Semi-cartridge - Weight: 74-83g

The 1-1/8" Ritchey Comp Cartridge Logic Threadless Headset features a smaller upper bearing to save weight, while the lightweight, precision-machined aluminum cups are deep for solid insertion. - Smaller upper bearing to save weight - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion - Stack Height: 30.2mm - Material: Steel - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Semi cartridge

- Steel cups - Steel retainer bearings - Available in chrome or black - Steerer Dia: 25.4mm - Cup Dia: 30mm

An average replacement headset for bikes with 1-1/8th threaded steerer tubes. Made by Tange in Japan so quality will be above most OEM spec'd items of similar style. Specs: -30.0mm crown race -34.0mm headtube diameter (Standard 1-1/8")

Replacement headset for bikes with at Headtube diameter of 30.0mm (ISO Standard) This will NOT fit most BMX bikes with 1" threaded forks. The quality of this Japanese made Tange Headset will be higher than most OEM spec'd bearings. Color: Black Material: Steel S.H.I.S. Diameter: 25.4mm (1") Steerer Type: Threaded Headtube Diameter: 30.0mm Crown Race: 27.0mm Stack Height: 33.3mm Weight: 145g

A high quality headset light enough for racing and strong enough for offroad use. – Sealed cartridge bearings. – 25.3mm stack height. – 81g. – 1-1/8? size. – Available in Black or Silver [Tech Specs] – Lightweight and strong duraluminum alloy construction – Tange Seiki original sized 4T5 Cartridge Bearing – Fully Sealed Mechanism – see Images [Made in Japan]

Crown races for Wolf Tooth headsets. - For Wolf Tooth headsets

Headset bearings for Wolf Tooth headsets. - Replacement bearings

Headset bearings for Wolf Tooth headsets. - Replacement bearings

Wolf Tooth Performance Headsets feature Black Oxide Cartridge Bearings, balancing quality and price. - Black Oxide Bearings are made from chromium steel for high load capacity and durability - Black oxide coating reduces corrosion

Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. - Black Oxide Bearings are made from chromium steel for high load capacity and durability - Black oxide coating reduces corrosion

Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. - Black Oxide Bearings are made from chromium steel for high load capacity and durability - Black oxide coating reduces corrosion

Headset bearings for Wolf Tooth headsets. - Replacement bearings

Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. - Black Oxide Bearings are made from chromium steel for high load capacity and durability - Black oxide coating reduces corrosion