Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other

$5.00
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts.
- Sold as a pair; two bolts and two springs
- M4x0.7mm thread
- Length: 45mm

$10.00
Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap.
- Includes star nut

$15.00
Snap-on brake cable guides for bikes that don't have any.
- Steel cable housing guide for 1-1/8" top tubes
- Snaps on; no bolts
- Set of 3 clamps

$15.00
Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis?
Well, boy howdy do we have just the thing...

$20.00
This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame.
- Alloy construction
- Replacement derailleur hanger sold separately (Part Number DP0814)
- Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp.
- Laser-etched All-City logo
- Aluminum body with stainless steel hardware

$45.00
Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included.
- Aluminum hatch cover with stainless screws
- All necessary screws and plates included

$50.00
The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models.
- Allows riders to convert from a geared to single-speed setup or vice-versa
- Compatible only with select All-City models
- No additional chain tension adjustment required
- Threaded cap / nut for axle installation
- Cap nut and O-ring included
- Use with drive-side plates

$25.00
Chris King Threadfit Bottom Bracket Conversions to mate your King ThreadFit BB to your chosen frame and crank spindle.

$15.00
- Specially shaped composite material helps prevent chain derailment when shifting to inner ring
- Split clamp design mounts to specific seat tube diameters, eliminating the need for a metal fitment clamp

$42.00
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$25.00
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork

$12.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible

$14.00
This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks
- Designed to fit alloy FSA cranks only
- Includes M17 bolt, M27 self-extracting cap, and washers

$22.00
This is a pair of spacers that adapts a 386 EVO crankset to a 68mm BB30 or PF30 frame; use in combination with the standard bottom bracket for your chosen frame.

$3.50
-M6 x 18 x 5mm Hex Head bolt
-This will fit most BMX frames with an integrate seat clamp
-Made from Grade 12.9 tough steel

$8.00
Male bolts for G-Sport hubs.
Male 14mm Bolts for Female Hub axles, and featuring both 17mm wrench flats and 6mm hex broach

$8.00
Male bolts for G Sport hubs.
3/8" bolts for Female Hub Axles, and featuring both 17mm wrench flats and 6mm hex broach
These are typically the Front bolts, whereas the 14mm option fits the rear

$21.00
The K-EDGE Road Chain Catcher is THE Original Chain Catcher used by professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia.
The K-EDGE chain catcher is a simple add-on component machined to precision which improves the overall function of your drive train and protects your valuable frame from dropped chains.
- Material: 6061-T6 CNC machined Aluminum
- Fitment: All braze-on mounted front derailleurs*
- Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs
* Not compatible with Campy EPS
* May not work with all third party braze-on adapter clamps
- Made in Boise, Idaho, USA,
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Page 1 of 11
Next page